 |
 |
|
|
 |
Fire /
Extinguishers |
 |
|
 |
 |
| |
The Fire Control Instruments 7200 Series Analog/ FCINET/
Hardwire Fire Alarm Control is multiprocessor-based and de signed for
commercial, industrial, proprietary, central station and institutional
applications. The 7200 Series may be configured as an
analog/addressable, point identified system where individual
identification of initiating devices and control points are required, a
conventional hard-wired, zone-identified system, or combination of both.
It meets the requirements of NFPA Standard 72, and is suitable for releasing device service. The 7200 Series is field
programmable to perform a wide
variety of functions. Inherently power limited, it can accommodate 15 units of one type with a maximum
total combination of 30 units. Units are available in a wide range of
configurations.
Designed around multiprocessors that provide and control
all system functions, the 7200 Series has a powerful software
structure that affords true "distributed processing" of all system components. The system can accommodate module
placement at either a central location, or up to fifteen ( 15 ) remote locations via the FCINET communications to provide
multiplex system features.
The FCI Listed Integrated Sensitivity Testing (LIST) program meets all NFPA 72 requirements for testing and monitoring of
sensor sensitivity.
The 7200 Series control has been tested for extraordinary
ambient conditions with 6,000 volt transient immunity circuits.
Features:
|
- FCINET® (FCI Communication Network)
Control/Remote Signaling Line Circuits
- Inherently Power Limited per UL 864
- ADAC® Degrade Operation
- Suitable for Releasing Device Service
- Two Field Programmable Modes:
- Front Panel/Auto-configuration
- Computer
- Programming Diagnostic Center
- Non-volatile Data Storage
- Distributed Processing
- RS-232 Serial Output
- Walk Test Feature
- 500 Event History Log
- Class A, Style D or Class B, Style B
Initiating Zone Circuits
- Class A, Style Z or Class B, Style Y
Individually Programmable
Notification Appliance Circuits
- Alarm Verification
- Dual Rate Charger
- Enhanced Transient Protection
- Field Expandable
Optional Features: |
- FireVac®7200 Distributed Fire Alarm/Voice
Evacuation System Operation
- 80-Character Alpha-numeric Display
- Listed Integral Sensitivity Testing meets
NFPA 72 Testing Requirements
- Drift Compensation Over comes Effects
of Aging or Environment on Sensor
Sensitivity
- "Dirty" and "Very Dirty" Sensor Indications
- Day/Night Sensor Sensitivity Setting
- Class A, Style 6/7 or Class B, Style 4
Signaling Line Circuits
- Selectable Analog Sensor Alarm Verification
- Individually Programmable
- Control and Power Relays
- Switching Technology Power Supply
- Interface with FireVac® III Emergency
Voice Evacuation System
- Releasing Device Unit with Abort Timer
|
|
|
|
|
