|
Amerex Industrial Systems
We’ve got you covered with the best Fire Extinguisher
agent available
The Amerex "IS" system uses our exclusive ABC (Model
555) dry chemical. ABC dry chemical suppresses more
fire, by volume, than any other agent. ABC dry chemical
has quick flame "knock-down" and can help to secure
Class A fires against re-ignition. Since many hazards
involve a variety of fuel sources, our ABC dry chemical,
with protection against Class A (wood, paper, pulp),
Class B (flammable liquids) and Class C (live electrical
equipment) is the agent that is best suited for most
Industrial hazards.
Always ready when you need it
The Amerex "IS" industrial system incorporates an
automatic detection system that will operate in case of
a fire anytime, 24/7, even if no one is present. As with
the rest of the "IS" system design and philosophy, the
automatic fire detection system uses fewer components
which saves on installation and maintenance costs.
Fewer Cylinders, Fewer Nozzles, Less Pipe
The Amerex "IS" industrial system uses fewer nozzles,
including a unique "3-way" nozzle that eliminates the
need for two separate nozzles for many situations. In
some cases this may even eliminate an extra agent
cylinder!
Amerex "IS" exclusives:
"Over-size" Paint Spray Booths – The Amerex "IS" has the
first UL Listing allowing nozzles to be placed up to
23'-4" above the floor – now you can protect large
vehicle paint spray booths that are used for trucks and
heavy equipment with a fully UL Listed system that has
been specifically tested using live fires for this
application.
First Industrial system to be listed by UL under the
newest edition of test Standard 1254 for nozzle heights
up to 23'-4" above the floor – excellent for covering
truck and heavy equipment spray booths.
Nozzles may be placed down the center of a standard
sized booth to make filter replacement easy.
"Standard-sized Down Draft" Booths using the ceiling as
a plenum – The Amerex "IS" system has unique UL Listings
that allow for options regarding the placement of
nozzles. Nozzles may be placed in the traditional “H”
pattern or they may be placed “Inline” down the center
of the ceiling or even at the side walls. This allows
nozzles to be placed out of the way for periodic
replacement of the filters saving you time, money and
hassle.
"New Coverage" for paint spray booths -
The Amerex "IS" System has a new nozzle, the TFP (Total
Flooding Perimeter) nozzle. A single IS45 cylinder using
two TFP nozzles will cover 30% more volume – 5,440 cu.
ft. – compared to the standard coverage using four TF
nozzles. Locating the TFP nozzles on the perimeter saves
on system components, number of cylinders and piping.
Nozzle location will be easier while a typical system
installation will require less equipment and less
installation time.
Operating Temperatures:
Local Application Overhead -32degF to 120deg F (0degC to
49degC)
Local Application Tankside -20degF to 120degF (-29degC
to 49degC)
Total Flood Applications -40degF to 120degF (-40degC to
49degC)
Vehicle Paint Spray Booth -20degF to 120degF (-29degC to
49degC)
Open Front Paint Spray Booth -20degF to 120degF (-29degC
to 49degC)
Fewer Cylinders
- Fewer Nozzles
- Less Pipe
- Always ready when you need it
|
